Procyon Carpet & Upholstery

Vacuum thoroughly. For home use, follow directions for Portable Extraction.
PRE-SPRAY/EXTRACTION: For use on heavily soiled carpet traffic areas. Effectively dissolves grease, dirt,
grime, spots and stains. Mix 4 oz. to 1 gallon of COLD, WARM or HOT water. Pre-spray evenly. DO NOT OVER
WET. Let dwell for 10 minutes. Extract with fresh water.
PORTABLE EXTRACTION (without pre-spray): Mix 4 oz. to 1 gallon of COLD, WARM or HOT water. For
all portable extractors including extractors with a siphon tube. In this case, simply place the siphon tube into the
concentrated liquid.
BONNET CLEANING: Mix 4 oz. to 1 gallon of COLD, WARM or HOT water. Pre-spray evenly on heavily
soiled area. Let dwell for 10 minutes. For best results, bonnet using 100% cotton bonnet pads.
WICKING & BROWNING: Mix 2 oz. to 1 gallon of COLD, WARM or HOT water. Pre-spray the carpet fiber.
DO NOT OVER WET. Let dwell for 10 minutes. For best results bonnet using 100% cotton bonnet pads to absorb
moisture and to prevent wicking or browning problems.
UPHOLSTERY: Mix 2 oz. to 1 gallon of COLD or WARM water. Pre-spray evenly, applying from the base of
the upholstery going up and extract from the top going down.
HYDRO FORCE: Mix 32 oz. to 1 gallon of WARM or HOT water (meter 1:8). Apply evenly. Let dwell for 10
minutes.
TRUCK MOUNT: Fresh water rinse. Set heat at 180° to 200° NOTE: Rinsing agents are not needed.