Description
extraction.
PRE-SPRAY/EXTRACTION: For use on heavily soiled carpet traffic areas. Effectively dissolves grease, dirt, grime,
spots and stains. Mix 4 oz. to 1 gallon of COLD, WARM, or HOT water. Pre-spray evenly. DO NOT OVER WET. Let dwell
for 10 minutes. Extract with fresh water.
PORTABLE EXTRACTION (without pre-spray): Mix 4 oz. to 1 gallon of COLD, WARM, or HOT water. For all
portable extractors including extractors with a siphon tube. In this case, simply place the siphon tube into the concentrated
liquid.
ENCAPSULATION PRE-SPRAY: Mix 4 oz. to 1 gallon of COLD, WARM or HOT water – agitate. After fiber dries,
vacuum thoroughly.
BONNET CLEANING: Mix 4 oz. to 1 gallon of COLD, WARM, or HOT water. Pre-spray evenly on heavily soiled area.
Let dwell for 10 minutes. For best results, bonnet using 100% cotton bonnet pads.
WICKING & BROWNING: Mix 2 oz. to 1 gallon of COLD, WARM or HOT water. Pre-spray the carpet fiber. DO NOT
OVER WET. Let dwell for 10 minutes. For best results bonnet using 100% cotton bonnet pads to absorb moisture and to
prevent wicking or browning problems.
UPHOLSTERY: Mix 2 oz. to 1 gallon of COLD or WARM water. Pre-spray evenly, applying from the base of the
upholstery going up and extract from the top going down.
HYDRO FORCE: Mix 32 oz. to 1 gallon WARM or HOT water (meter 1:8). Apply evenly. Let dwell for 10 minutes.
TRUCK MOUNT: Fresh water rinse. Set heat at 180° to 200° F. NOTE: Rinsing agents are not needed
128 OZ. (One Gallon)
32 OZ. (One Quart)
5 Gallon Pail
Reviews
There are no reviews yet.